Motor din oțel inoxidabil pentru aplicații riguroase de spălare

Features of Stainless Steel Motor

  • Single cable for power supply and feedback… Easier to clean
  • No external hardware… Smooth, easier to clean
  • 316L stainless steel. Easy to clean and highly corrosion resistant
  • Ventilation motor option (passive)… Reduces condensation and extends service life
  • A full range of 19 motor sizes are available – best for your machine
  • Ip69k 1450 psi flushing seal standard
  • Laser annealed nameplate…… no pathogens
  • The puddle has no flat surface
  • Designed according to EHEDG and 3a standards
Categorie:

Motor din oțel inoxidabil pentru aplicații riguroase de spălare

Motor din oțel inoxidabil pentru aplicații riguroase de spălareThe new series from China can withstand the most stringent flushing scheme. The combination of the ip69 structure of ever-power and corrosion-resistant materials enables the servo motor to extend the machine's service life.

Ever-power enables fast cleaning. Ever-power is specially designed for CIP (local cleaning) without a cover plate, which can maximize your uptime and profit. The Ever-power series is available in 19 sizes and various standard configurations, which will open the door to replacing expensive air shafts or dirty hydraulic shafts with clean and high-performance servo motor solutions.

Features of Stainless Steel Motor

  • Single cable for power supply and feedback... Easier to clean
  • No external hardware... Smooth, easier to clean
  • 316L stainless steel. Easy to clean and highly corrosion resistant
  • Ventilation motor option (passive)... Reduces condensation and extends service life
  • A full range of 19 motor sizes are available - best for your machine
  • Ip69k 1450 psi flushing seal standard
  • Laser annealed nameplate...... no pathogens
  • The puddle has no flat surface
  • Designed according to EHEDG and 3a standards
Tip cadru Tipul flanșei stalpi D E F G M N P R S T Orificiul flanșei Orificiul arborelui AC AD
63 FT75 2,4 11 23 4 8.5 75 60 90 0 M5 2.5 4 M4 114 117
71 FT85 2.4.6 14 30 5 11 85 70 105 0 M6 2.5 4 M5 134 129
80 FT100 2.4.6 19 40 6 155 100 80 120 0 M6 3 4 M6 144 135
90S FT115 2.4.6 24 50 8 20 115 95 140 0 M8 3 4 M8 164 147

Internal structure diagram

Motor din oțel inoxidabil pentru aplicații riguroase de spălare

① 300-series stainless steel exterior components-frame, base, end shields, shaft extension, fan guard, hardware, conduit box, and cover- for maximum corrosion resistance

② Laser-etched full-fact nameplate on the motor frame

③ Anti-corrosion coating applied to rotor and heavy polyester varnish on the stator to prevent corrosion

④ Double-sealed bearings with moisture-resistant high-temperature grease.

⑤ Rubber-covered seals on both shaft extensions of TEFC motors

⑥ Split conduit box design with flanged cover and rubber gasket for better sealing

⑦ Heavy duty 12 ga stamped base used on all ratings

⑧ Moisture-resistant sealant between frame and end shields excludes water

⑨ Four condensate drains in each windshield (at 3,6,9 and 12 o'clock)provide locations to purge condensate and water, which may enter

Alte motoare din oțel inoxidabil

Motor din oțel inoxidabil IEC B3 montat pe picior -TENV

Motor din oțel inoxidabil IEC B3 montat pe picior -TENV

Motor din oțel inoxidabil montat frontal IEC B14 -TENVMotor din oțel inoxidabil montat frontal IEC B14 -TENV Motor din oțel inoxidabil montat pe flanșă IEC B15 -TENVMotor din oțel inoxidabil montat pe flanșă IEC B15 -TENV Motor din oțel inoxidabil IEC B3 montat pe picior -TEFCMotor din oțel inoxidabil IEC B3 montat pe picior -TEFC
Motor din oțel inoxidabil montat frontal IEC B14 -TEFCMotor din oțel inoxidabil montat frontal IEC B14 -TEFC Motor din oțel inoxidabil IEC B5 montat pe flanșă -TEFCMotor din oțel inoxidabil IEC B5 montat pe flanșă -TEFC Motor din oțel inoxidabil NEMA -TENVMotor din oțel inoxidabil NEMA -TENV Motor din oțel inoxidabil NEMA -TEFCMotor din oțel inoxidabil NEMA -TEFC
Motor din oțel inoxidabil NEMA -TENV Condensator unicMotor din oțel inoxidabil NEMA -TENV Condensator unic Motor din oțel inoxidabil NEMA -TEFC Condensator unicMotor din oțel inoxidabil NEMA -TEFC Condensator unic Motor din oțel inoxidabil NEMA - TEFC dublu condensatorNEMA stainless steel motor -TEFC double capacitor

 

Informații suplimentare

editat

Miya

Detalii rapide despre produs:

  • Sunt disponibile standard și non-standard
  • Cu înaltă calitate și preț competitiv
  • livrare prompta
  • Ambalare conform cererii clientului.

Promitem că va oferi cel mai bun preț prin calitate ridicată în China! De asemenea, acceptăm comenzi speciale despre produse. Dacă sunteți interesat de produsele noastre. Vă rugăm să nu ezitați să ne anunțați. Suntem încântați să vă oferim informații detaliate. Promitem că produsele noastre vor fi sigure și vor avea o calitate ridicată și un preț rezonabil. Dacă sunteți interesat de produsele noastre, vă rugăm să ne contactați cât mai curând. Vă căutăm sincer cooperarea.

Majoritatea produselor noastre sunt exportate în Europa sau America, atât produse standard, cât și produse non-standard disponibile. Putem produce conform desenului sau eșantionului dvs. Materialul poate fi standard sau conform cererii dvs. speciale. Dacă ne alegeți pe noi, alegeți fiabile.

raport de calitate pruduct

Materiale disponibile

1. Oțel inoxidabil: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Alamă: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200 (CuZn37), C28000 (CuZn40)
4. Bronz: C51000, C52100, C54400, etc
5. Fier: 1213, 12L14,1215
6. Aluminiu: Al6061, Al6063
7. OEM în funcție de solicitarea dvs.
materiale disponibile pentru produs

Tratament de suprafață

Recuiere, canonizare naturală, tratament termic, lustruire, nichelare, cromare, zincare, pasivizare galbenă, pasivizare aurie, satinat, suprafață neagră vopsită etc.

Metoda de procesare

Prelucrare CNC, perforare, strunjire, frezare, găurire, șlefuire, brosare, sudare și asamblare
finisarea produsului

QC și certificat

Tehnicienii se auto-verifică în producție, se verifică final înainte de pachet de către un inspector de calitate profesionist
ISO9001: 2008, ISO14001: 2001, ISO / TS 16949: 2009

Pachet și timp de livrare

Dimensiune: Desene
Cutie / container din lemn și palet sau conform specificațiilor personalizate.
Eșantioane de 15-25 zile. Comandă oficială de 30-45 zile
Port: port Shanghai / Ningbo
pachete de produse