Cuplaj elastomeric

Cuplaj elastomeric

Categorie: Etichetă:

Elastomeric couplings are a form of flexible coupling that uses an insert made of an elastomeric polymer to help transmit torque. The design of elastomeric couplings means that the elastic material is meant to wear out before any metal components. This not only saves time and money on maintenance but also means that the couplings do not require any form of lubrication.

Jaw type couplings are general purpose and consist of an elastomeric element, commonly referred to as a spider, sandwiched between two metal hubs with interlocking teeth. The spider acts as a shock absorber for the coupling and helps to reduce vibrations and, in some applications, electrical isolation.  Jaw couplings are considered to be fail-safe because if the spider were to fail, the teeth of the two hubs would interlock and continue to transmit torque. This would decrease coupling performance but would prevent damage to the machine and give engineers time to shut the system down.

Gear type couplings consist of two hubs with external teeth that engage internal teeth on a two- or one-piece sleeve. The teeth may be straight or curved (crowned). Often these couplings use a metal sleeve, but elastomer sleeves are available. These elastomer-based couplings, however, have lower torque and speed capabilities because of the limitations of the elastomers natural lubrication abilities.

Tire type couplings, not surprisingly, resemble the tires on a car. This design consists of two flanged hubs equipped with clamping plates, which grip the coupling’s hollow, ring-shaped element, by its inner rims. Tire coupling elements are usually rubber derivative elastomers with layers of cord, such as nylon, vulcanized into the tire shape. The coupling transmits torque through the friction of the clamp applied to the inner rims of the tire and a shearing of the element. Axial forces on the shaft caused by centrifugal forces working on the elastomer, restrict the speed of these couplings. Additionally, their bulky size limits what applications they could be applied to, although there is a variant with the tire inverted to reduce the coupling’s size.

Like other flexible couplings, elastomeric couplings are meant to not only transmit torque, but accommodate for misalignment between shafts as well. The amount of misalignment that these couplings can accommodate varies by type and by manufacturer.

Detalii rapide despre produs:

  • Sunt disponibile standard și non-standard
  • Cu înaltă calitate și preț competitiv
  • livrare prompta
  • Ambalare conform cererii clientului.

Promitem că va oferi cel mai bun preț prin calitate ridicată în China! De asemenea, acceptăm comenzi speciale despre produse. Dacă sunteți interesat de produsele noastre. Vă rugăm să nu ezitați să ne anunțați. Suntem încântați să vă oferim informații detaliate. Promitem că produsele noastre vor fi sigure și vor avea o calitate ridicată și un preț rezonabil. Dacă sunteți interesat de produsele noastre, vă rugăm să ne contactați cât mai curând. Vă căutăm sincer cooperarea.

Majoritatea produselor noastre sunt exportate în Europa sau America, atât produse standard, cât și produse non-standard disponibile. Putem produce conform desenului sau eșantionului dvs. Materialul poate fi standard sau conform cererii dvs. speciale. Dacă ne alegeți pe noi, alegeți fiabile.

raport de calitate pruduct

Materiale disponibile

1. Oțel inoxidabil: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Alamă: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200 (CuZn37), C28000 (CuZn40)
4. Bronz: C51000, C52100, C54400, etc
5. Fier: 1213, 12L14,1215
6. Aluminiu: Al6061, Al6063
7. OEM în funcție de solicitarea dvs.
materiale disponibile pentru produs

Tratament de suprafață

Recuiere, canonizare naturală, tratament termic, lustruire, nichelare, cromare, zincare, pasivizare galbenă, pasivizare aurie, satinat, suprafață neagră vopsită etc.

Metoda de procesare

Prelucrare CNC, perforare, strunjire, frezare, găurire, șlefuire, brosare, sudare și asamblare
finisarea produsului

QC și certificat

Tehnicienii se auto-verifică în producție, se verifică final înainte de pachet de către un inspector de calitate profesionist
ISO9001: 2008, ISO14001: 2001, ISO / TS 16949: 2009

Pachet și timp de livrare

Dimensiune: Desene
Cutie / container din lemn și palet sau conform specificațiilor personalizate.
Eșantioane de 15-25 zile. Comandă oficială de 30-45 zile
Port: port Shanghai / Ningbo
pachete de produse