#41 Roller Chain Sprockets
Our 41 roller chain sprockets are manufactured dimensionally to ANSI B29 Standards and are manufactured from high-strength high-grade steel for optimal wear life and performance, while still being supplied at a budget-friendly cost. A high-quality sprocket is essential to the long-term operation of the chain drive. If sprockets are manufactured out of cheaper and lower-grades of steel the teeth will wear and hook resulting in excessive wear on the 41 roller chain.
#41 A-Plate Sprockets
| Sprocket Size | Tooth Count | Type | Outside Diameter | Stock Bore | Weight (LBS) |
|---|---|---|---|---|---|
| 41A15 | 15 | A | 5/8 | 0.28 | |
| 41A16 | 16 | A | 5/8 | 0.34 | |
| 41A17 | 17 | A | 5/8 | 0.36 | |
| 41A18 | 18 | A | 5/8 | 0.44 | |
| 41A19 | 19 | A | 5/8 | 0.46 | |
| 41A20 | 20 | A | 5/8 | 0.52 | |
| 41A21 | 21 | A | 5/8 | 0.60 | |
| 41A22 | 22 | A | 5/8 | 0.66 | |
| 41A23 | 23 | A | 5/8 | 0.72 | |
| 41A24 | 24 | A | 5/8 | 0.82 | |
| 41A25 | 25 | A | 5/8 | 0.88 | |
| 41A26 | 26 | A | 5/8 | 0.94 | |
| 41A27 | 27 | A | 5/8 | 1.00 | |
| 41A28 | 28 | A | 5/8 | 1.08 | |
| 41A30 | 30 | A | 19/32 | 1.20 | |
| 41A32 | 32 | A | 19/32 | 1.44 | |
| 41A35 | 35 | A | 19/32 | 1.70 | |
| 41A36 | 36 | A | 19/32 | 1.84 | |
| 41A40 | 40 | A | 23/32 | 2.22 | |
| 41A42 | 42 | A | 23/32 | 2.50 | |
| 41A45 | 45 | A | 23/32 | 2.52 | |
| 41A48 | 48 | A | 23/32 | 2.92 | |
| 41A54 | 54 | A | 23/32 | 3.54 | |
| 41A60 | 60 | A | 21/32 | 4.60 | |
| 41A70 | 70 | A | 23/32 | 6.22 | |
| 41A72 | 72 | A | 23/32 | 6.32 | |
| 41A80 | 80 | A | 23/32 | 8.46 | |
| 41A84 | 84 | A | 23/32 | 9.12 | |
| 41A96 | 96 | A | 15/16 | 11.84 | |
| 41A112 | 112 | A | 15/16 | 15.84 |
#41 B-Hub Sprockets
| Sprocket Size | Tooth Count | Type | Outside Diameter | Stock Bore | Recommend Max. Bore | Hub Diameter | Length Thru Bore | Weight (LBS) |
|---|---|---|---|---|---|---|---|---|
| 41B6 | 6 | B | 1.170 | 3/8 | 3/8 | 21/32 | 7/8 | 0.07 |
| 41B7 | 7 | B | 1.340 | 1/2 | 3/8 | 3/4 | 7/8 | 0.10 |
| 41B8 | 8 | B | 1.510 | 1/2 | 1/2 | 63/64 | 7/8 | 0.19 |
| 41B9 | 9 | B | 1.670 | 1/2 | 5/8 | 1-1/8 | 7/8 | 0.20 |
| 41B10 | 10 | B | 1.840 | 1/2 | 3/4 | 1-1/4 | 7/8 | 0.27 |
| 41B11 | 11 | B | 2.000 | 1/2 | 7/8 | 1-7/16 | 7/8 | 0.35 |
| 41B12 | 12 | B | 2.170 | 1/2 | 15/16 | 1-9/16 | 7/8 | 0.44 |
| 41B13 | 13 | B | 2.330 | 1/2 | 1 | 1-9/16 | 7/8 | 0.50 |
| 41B14 | 14 | B | 2.490 | 1/2 | 1-1/4 | 1-3/4 | 7/8 | 0.57 |
| 41B15 | 15 | B | 2.650 | 5/8 | 1-5/16 | 1-29/32 | 7/8 | 0.72 |
| 41B16 | 16 | B | 2.810 | 5/8 | 1-3/8 | 2-1/16 | 7/8 | 0.91 |
| 41B17 | 17 | B | 2.970 | 5/8 | 1-1/2 | 2-15/64 | 1 | 1.09 |
| 41B18 | 18 | B | 3.140 | 5/8 | 1-5/8 | 2-3/8 | 1 | 1.25 |
| 41B19 | 19 | B | 3.300 | 5/8 | 1-3/4 | 2-15/32 | 1 | 1.49 |
| 41B20 | 20 | B | 3.460 | 5/8 | 1-7/8 | 2-3/4 | 1 | 1.64 |
| 41B21 | 21 | B | 3.620 | 5/8 | 1-7/8 | 2-7/8 | 1 | 1.81 |
| 41B22 | 22 | B | 3.780 | 5/8 | 2 | 3 | 1 | 1.93 |
| 41B23 | 23 | B | 3.940 | 5/8 | 2-1/4 | 3-3/16 | 1 | 2.25 |
| 41B24 | 24 | B | 4.100 | 5/8 | 2-1/4 | 3-1/4 | 1 | 2.33 |
| 41B25 | 25 | B | 4.260 | 5/8 | 2-1/4 | 3-1/4 | 1 | 2.46 |
| 41B26 | 26 | B | 4.420 | 5/8 | 2-1/4 | 3-1/4 | 1 | 2.50 |
| 41B27 | 27 | B | 4.580 | 5/8 | 2-1/4 | 3-1/4 | 1 | 2.56 |
| 41B28 | 28 | B | 4.740 | 5/8 | 2-1/4 | 3-1/4 | 1 | 2.64 |
| 41B30 | 30 | B | 5.060 | 5/8 | 2-1/4 | 3-1/4 | 1 | 2.80 |
| 41B32 | 32 | B | 5.380 | 5/8 | 2-1/4 | 3-1/4 | 1 | 2.96 |
| 41B35 | 35 | B | 5.860 | 5/8 | 2-3/8 | 3-1/4 | 1 | 3.12 |
| 41B36 | 36 | B | 6.020 | 3/4 | 2-3/8 | 3-1/4 | 1 | 3.32 |
| 41B40 | 40 | B | 6.650 | 3/4 | 2-3/8 | 3-1/4 | 1-1/16 | 4.06 |
| 41B42 | 42 | B | 6.970 | 3/4 | 2-3/8 | 3-1/2 | 1-1/16 | 4.10 |
| 41B45 | 45 | B | 7.450 | 3/4 | 2-3/8 | 3-1/2 | 1-1/16 | 4.18 |
| 41B48 | 48 | B | 7.930 | 3/4 | 2-3/8 | 3-1/2 | 1-1/16 | 4.92 |
| 41B54 | 54 | B | 8.880 | 3/4 | 2-3/8 | 3-1/2 | 1-1/16 | 5.68 |
| 41B60 | 60 | B | 9.840 | 3/4 | 2-3/8 | 3-1/2 | 1-1/16 | 6.78 |
| 41B70 | 70 | B | 11.430 | 3/4 | 2-3/4 | 4 | 1-3/16 | 9.54 |
| 41B72 | 72 | B | 11.750 | 3/4 | 2-3/4 | 4 | 1-3/16 | 9.64 |
| 41B80 | 80 | B | 13.030 | 3/4 | 2-3/4 | 4 | 1-3/16 | 11.54 |
| 41B84 | 84 | B | 13.660 | 1 | 2-3/4 | 4 | 1-3/16 | 12.20 |
| 41B96 | 96 | B | 15.570 | 1 | 2-3/4 | 4 | 1-3/16 | 14.86 |
| 41B112 | 112 | B | 18.120 | 2-3/4 | 4 | 1-3/16 | 19.16 |
#41 Taper Bushed Sprockets
| Sprocket Size | Tooth Count | Bushing | Outside Diameter | Pitch Diameter | Max. Bore | Dimension (L) | Dimension (C) | Type | Weight (LBS) |
|---|---|---|---|---|---|---|---|---|---|
| 41BTB14 | 14 | 1008 | 2.490 | 2.247 | 1 | 7/8 | 1-7/8 | B | 0.4 |
| 41BTB15 | 15 | 1008 | 2.650 | 2.503 | 1 | 7/8 | 1-7/8 | B | 0.5 |
| 41BTB16 | 16 | 1008 | 2.810 | 2.721 | 1 | 7/8 | 2 | B | 0.6 |
| 41BTB17 | 17 | 1210 | 2.970 | 2.879 | 1-1/4 | 1 | 2-3/8 | B | 0.7 |
| 41BTB18 | 18 | 1210 | 3.140 | 3.038 | 1-1/4 | 1 | 2-3/8 | B | 0.9 |
| 41BTB19 | 19 | 1210 | 3.300 | 3.196 | 1-1/4 | 1 | 2-1/2 | B | 1.1 |
| 41BTB20 | 20 | 1610 | 3.460 | 3.355 | 1-5/8 | 1 | 2-7/8 | B | 1.1 |
| 41BTB21 | 21 | 1610 | 3.620 | 3.513 | 1-5/8 | 1 | 3 | B | 1.2 |
| 41BTB22 | 22 | 1610 | 3.780 | 3.672 | 1-5/8 | 1 | 3 | B | 1.3 |
| 41BTB23 | 23 | 1610 | 3.940 | 3.831 | 1-5/8 | 1 | 3 | B | 1.4 |
| 41BTB24 | 24 | 1610 | 4.100 | 3.989 | 1-5/8 | 1 | 3 | B | 1.4 |
| 41BTB25 | 25 | 1610 | 4.260 | 4.148 | 1-5/8 | 1 | 3 | B | 1.5 |
| 41BTB26 | 26 | 1610 | 4.420 | 4.466 | 1-5/8 | 1 | 3 | B | 1.5 |
| 41BTB28 | 28 | 1610 | 4.740 | 4.783 | 1-5/8 | 1 | 3 | B | 1.7 |
| 41BTB30 | 30 | 1610 | 5.060 | 5.101 | 1-5/8 | 1 | 3 | B | 1.8 |
| 41BTB32 | 32 | 1610 | 5.380 | 5.578 | 1-5/8 | 1 | 3 | B | 1.9 |
| 41BTB35 | 35 | 1610 | 5.860 | 5.737 | 1-5/8 | 1 | 3 | B | 2.3 |
| 41BTB36 | 36 | 1610 | 6.020 | 6.373 | 1-5/8 | 1 | 3 | B | 2.4 |
| 41BTB40 | 40 | 1610 | 6.650 | 7.168 | 1-5/8 | 1 | 3 | B | 2.7 |
| 41BTB45 | 45 | 1610 | 7.450 | 7.645 | 1-5/8 | 1 | 3 | B | 3.5 |
| 41BTB48 | 48 | 1610 | 7.930 | 8.599 | 1-5/8 | 1 | 3 | B | 4.1 |
| 41BTB54 | 54 | 1610 | 8.880 | 9.554 | 1-5/8 | 1 | 3 | B | 4.9 |
| 41BTB60 | 60 | 1610 | 9.840 | 11.145 | 1-5/8 | 1 | 3 | B | 5.7 |
| 41BTB70 | 70 | 1610 | 11.430 | 11.463 | 1-5/8 | 1 | 3 | B | 7.4 |
| 41BTB72 | 72 | 1610 | 11.750 | 12.736 | 1-5/8 | 1 | 3 | B | 8.2 |
| 41BTB80 | 80 | 1610 | 13.030 | 15.282 | 1-5/8 | 1 | 3 | B | 9.6 |
| 41BTB96 | 96 | 1610 | 15.570 | 1610 | 1-5/8 | 1 | 3 | B | 13.1 |
#41 QD Sprockets
| Sprocket Size | Tooth Count | Bushing | Outside Diameter | Pitch Diameter | Type | Max. Bore | Dimension (L1) | Dimension (L2) | Dimension (C) | Dimension (Y) | Dimension (J) | Dimension (T) | Weight (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 41JA16 | 15 | JA | 2.650 | 2.405 | B | 1-1/4 | 1-1/8 | 1-1/8 | 2-1/16 | 49/64 | 25/64 | .227 | 0.32 |
| 41JA16 | 16 | JA | 2.810 | 2.563 | B | 1-1/4 | 1-1/8 | 1-1/8 | 2-1/16 | 49/64 | 25/64 | .227 | 0.40 |
| 41JA17 | 17 | JA | 2.980 | 2.721 | B | 1-1/4 | 1-1/8 | 1-1/8 | 2-1/16 | 49/64 | 25/64 | .227 | 0.50 |
| 41JA18 | 18 | JA | 3.140 | 2.879 | B | 1-1/4 | 1-1/8 | 1-1/8 | 2-1/16 | 49/64 | 25/64 | .227 | 0.60 |
| 41JA19 | 19 | JA | 3.300 | 3.038 | B | 1-1/4 | 1-1/8 | 1-1/8 | 2-1/16 | 49/64 | 25/64 | .227 | 0.68 |
| 41SH20 | 20 | SH | 3.460 | 3.196 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 0.78 |
| 41SH21 | 21 | SH | 3.620 | 3.355 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 0.82 |
| 41SH22 | 22 | SH | 3.780 | 3.513 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.06 |
| 41SH23 | 23 | SH | 3.940 | 3.672 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.14 |
| 41SH24 | 24 | SH | 4.100 | 3.831 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.16 |
| 41SH25 | 25 | SH | 4.260 | 3.989 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.22 |
| 41SH26 | 26 | SH | 4.420 | 4.148 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.26 |
| 41SH27 | 27 | SH | 4.580 | 4.307 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.40 |
| 41SH28 | 28 | SH | 4.740 | 4.466 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.54 |
| 41SH30 | 30 | SH | 5.060 | 4.783 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.58 |
| 41SH32 | 32 | SH | 5.380 | 5.101 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.68 |
| 41SH35 | 35 | SH | 5.860 | 5.578 | B | 1-5/8 | 1-7/16 | 1-7/16 | 2-11/16 | 1-1/32 | 37/64 | .227 | 1.79 |
| 41SDS36 | 36 | SDS | 6.020 | 5.737 | B | 2 | 1-1/2 | 1-1/2 | 3-3/16 | 1-3/32 | 17/32 | 3/4 | 1.92 |
| 41SDS40 | 40 | SDS | 6.650 | 6.373 | B | 2 | 1-1/2 | 1-1/2 | 3-3/16 | 1-3/32 | 17/32 | 3/4 | 2.32 |
| 41SDS42 | 42 | SDS | 6.970 | 6.691 | B | 2 | 1-1/2 | 1-1/2 | 3-3/16 | 1-3/32 | 17/32 | 3/4 | 2.44 |
| 41SDS45 | 45 | SDS | 7.450 | 7.168 | B | 2 | 1-1/2 | 1-1/2 | 3-3/16 | 1-3/32 | 17/32 | 3/4 | 2.76 |
| 41SDS48 | 48 | SDS | 7.930 | 7.645 | B | 2 | 1-1/2 | 1-1/2 | 3-3/16 | 1-3/32 | 17/32 | 3/4 | 3.36 |
| 41SDS54 | 54 | SDS | 8.890 | 8.599 | B | 2 | 1-1/2 | 1-1/2 | 3-3/16 | 1-3/32 | 17/32 | 3/4 | 3.98 |
| 41SDS60 | 60 | SDS | 9.840 | 9.554 | B | 2 | 1-1/2 | 1-1/2 | 3-3/16 | 1-3/32 | 17/32 | 3/4 | 5.54 |
| 41SK70 | 70 | SK | 11.430 | 11.145 | B | 2-5/8 | 2-1/8 | 2-1/8 | 3-7/8 | 1-41/64 | 1-1/32 | 1-1/4 | 7.42 |
| 41SK72 | 72 | SK | 11.750 | 11.463 | B | 2-5/8 | 2-1/8 | 2-1/8 | 3-7/8 | 1-41/64 | 1-1/32 | 1-1/4 | 8.02 |
| 41SK80 | 80 | SK | 13.030 | 12.736 | B | 2-5/8 | 2-1/8 | 2-1/8 | 3-7/8 | 1-41/64 | 1-1/32 | 1-1/4 | 9.64 |
| 41SK84 | 84 | SK | 13.660 | 13.372 | B | 2-5/8 | 2-1/8 | 2-1/8 | 3-7/8 | 1-41/64 | 1-1/32 | 1-1/4 | 10.40 |
| 41SK96 | 96 | SK | 15.570 | 15.281 | B | 2-5/8 | 2-1/8 | 2-1/8 | 3-7/8 | 1-41/64 | 1-1/32 | 1-1/4 | 12.82 |
| 41SK112 | 112 | SK | 18.120 | 17.828 | B | 2-5/8 | 2-1/8 | 2-1/8 | 3-7/8 | 1-41/64 | 1-1/32 | 1-1/4 | 17.28 |
#41 A-Plate Sprockets
#41 B-Hub Sprockets
#41 Taper-Bushed Sprockets
#41 JA Type Sprockets
#41 SH Type Sprockets
#41 SDS Type Sprockets
#41 SK Type Sprockets
Produs Detalii rapide:
- Standard și non-standard disponibile
- Cu înaltă calitate și preț competitiv
- Livrare promptă
- Ambalare ca pe cererea clientului.
Promitem va oferi cel mai bun preț de înaltă calitate în China! Acceptăm, de asemenea, comanda specială despre produse. Dacă sunteți interesat de produsele noastre. Vă rugăm să nu ezitați să ne anunțați. suntem încântați să vă oferim informații detaliate. promitem că produsele noastre ar fi siguranță și au fost de înaltă calitate și preț rezonabil. Dacă sunteți interesat de produsele noastre, vă rugăm să ne contactați asap.We sunt sincer în căutarea pentru cooperarea dumneavoastră.
Cele mai multe dintre produsele noastre sunt exportate în Europa sau în America, fiind disponibile atât produse standard, cât și nestandardizate. Putem produce conform desenului sau eșantionului dumneavoastră. Materialul poate fi standard sau conform cererii dvs. speciale. Dacă ne alegeți pe noi, alegeți încredere.
Materiale disponibile
1. Oțel inoxidabil: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Alamă:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronz: C51000, C52100, C54400, etc.
5. Fier: 1213, 12L14,1215
6. Aluminiu: Al6061, Al6063
7.OEM în funcție de cererea dvs.
Tratament de suprafață
Recoacere, canonizare naturală, tratament termic, lustruire, nichelare, cromare, zincare, pasivizare galbenă, pasivizare aurie, satin, suprafață neagră vopsită etc.
Metoda de prelucrare
Prelucrare CNC, perforare, strunjire, strunjire, frezare, găurire, șlefuire, broșare, sudare și asamblare.
QC & Certificat
Tehnicienii se autoverifică în producție, verificarea finală înainte de pachet de către inspectorul de calitate profesionist
ISO9001:2008 , ISO14001:2001, ISO/TS 16949:2009
Pachet și timp de plumb
Dimensiune: Desene
Caz din lemn / Container și palet, sau conform specificațiilor personalizate.
eșantioane de 15-25 de zile. 30-45 de zile comandă oficială
Port: portul Shanghai / Ningbo
RO 
EN 
AR 
BG 
ZH 
CS 
NL 
FR 
DE 
JA 
ID 
IT 
KO 
PT 
RU 
ES 
TR 
DA 
ET 
FI 
EL 
HU 
LT 
LV 
NB 
PL 
SK 
SL 
SV 
UK 
SW 
MS 
KK 
TH